В мемориз для коллег:
Понадобилось пробросить сервер ключей 1С в другую подсеть. А он собака по дефолту на netbios`e работает (что не труЪ).Хотелось по TCP. Решил следующим образом:
На сервере ключей конфиг
nhsrv.ini;
; NetHASP License Manager configuration file syntax.
;
;
; Note:
;
; All text lines are commented.
; Remove comments in the lines you want to use.
;
[NHS_SERVER]
;NHS_IP_LIMIT = < IpAddr > [, <IpAddr>...] ; Specify the range of stations
; the License Manager serves.
;
; Examples: 10.1.1.1, 10.1.1.*
; Applicable for the Win16 and
; Win32 License Managers.
NHS_ADAPTER_IP = 192.168.2.4
; Specify the adapter(s) to
; which the server listens.
;
; Example: 10.1.1.111-255.255.0.0
; Applicable only for the Win32
; License Manager.
на клиентах правим
NETHASP.INI;
; NetHASP Configuration file syntax.
;
;
; Note:
;
; All text lines were commented.
; Remove comments in the lines you want to use.
;
[NH_COMMON]
;
; Section-specific Keywords
;
;
; You can set only ONE of the following three Keywords to "Enabled"!
;
;;NH_IPX = Enabled or Disabled ; Use the IPX protocol
;;NH_NETBIOS = Enabled or Disabled ; Use the NETBIOS protocol
NH_TCPIP = Enabled ; Use the TCP/IP protocol
;;NH_MACHINE = IBM or NEC ; The computer on which the protected
; application is activated.
; Default: IBM
;
; General Keywords
;
;;NH_SESSION = <Num> ; See Adapting the Timeout Length
;;NH_SEND_RCV = <Num> ; in the HASP Programmer's Guide.
[NH_IPX]
;
; Section-specific Keywords for the IPX protocol.
;
;;NH_USE_BINDERY = Enabled or Disabled ; Use IPX with bindery.
; Default: Disabled
; Ignored under Win32 API.
; This switch replaces older switch
; named NH_USE_SAP.
;;NH_USE_BROADCAST = Enabled or Disabled; Use IPX Broadcast mechanism.
; Default: Enabled
;;NH_BC_SOCKET_NUM = <Number> ; Broadcast socket number (HEX).
; Default: 7483H
;;NH_USE_INT = 2F_NEW or 7A_OLD ; 2F_NEW means that IPX protocol will
; use interrupt 2Fh ONLY.
; 7A_OLD means that IPX protocol will
; use interrupt 7Ah ONLY.
; Default: 2F_NEW.
;;NH_SERVER_NAME = <Name1>, <Name2>,.. ; Communicate with the NetHASP
; Server with the specified name.
; Maximum: 6 names, up to 7
; case-insensitive characters each.
;;NH_SEARCH_METHOD = Localnet or Internet ; See Local Networks and
; Internetworks in the HASP
; Programmer's Guide.
;;NH_DATFILE_PATH = <path> ; Specify the location of the NetHASP
; License Manager's address file.
;
; General Keywords
;
;;NH_SESSION = <Num> ; See Adapting the Timeout Length
;;NH_SEND_RCV = <Num> ; in the HASP Programmer's Guide.
[NH_NETBIOS]
;
; Section-specific Keywords for the NetBIOS protocol.
;
;;NH_NBNAME = <Name> ; Assign a name to the NetHASP
; License Manager.
; 1 name possible, up to 8
; case-insensitive characters.
;;NH_USELANANUM = <Num> ; Assign a lana number to be used
; as a communication channel.
;
; General Keywords
;
;;NH_SESSION = <Num> ; See Adapting the Timeout Length
;;NH_SEND_RCV = <Num> ; in the HASP Programmer's Guide.
[NH_TCPIP]
;
; NetHASP does not support TCP/IP under DOS.
;
;
; Section-specific Keywords for the TCP/IP protocol.
;
NH_SERVER_ADDR = 192.168.2.4 ; IP addresses of all the NetHASP
; License Managers you want to search.
; Unlimited addresses and multiple
; lines are possible.
;
; Possible address format examples:
; IP address: 192.114.176.65
; Local Hostname: ftp.aladdin.co.il
;;NH_PORT_NUMBER = 475 ; Set the TCP/IP port number. This is
; optional. The default number is 475.
NH_TCPIP_METHOD = TCP ; Send a TCP packet or UDP packet
; Default: UDP
NH_USE_BROADCAST = Disabled ; Use TCPI/IP Broadcast mechanism.
; Default: Enabled
;;NH_SERVER_NAME = <Name1>, <Name2>, ; Communicate with the NetHASP
; Server with the specified name.
; Maximum: 6 names, up to 7
; case-insensitive characters each.
;
; General Keywords.
;
;;NH_SESSION = <Num> ; See Adapting the Timeout Length
;;NH_SEND_RCV = <Num> ; in the HASP Programmer's Guide.
И соответствено пробрасываем 475 порт.
Виртуальный Каменск
